Halaman utama Jelajahi Bantuan
Masuk
cinaeco
/
qmk_firmware
1
0
Fork 0
Berkas Masalah 0 Permintaan Tarik 0 Wiki
Pohon: 732a7f2be9
Ranting Tag
qmk_firmware
/
keyboards
/
lets_split
/
keymaps
/
OLED_sample
ishtob 80270a2791 Add files via upload 8 tahun lalu
..
Makefile f0962bce50 Add files via upload 8 tahun lalu
config.h f0962bce50 Add files via upload 8 tahun lalu
keymap.c f0962bce50 Add files via upload 8 tahun lalu
readme.md 80270a2791 Add files via upload 8 tahun lalu

readme.md

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

  • I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
  • OLED display will connect from either side

Wiring

The wiring for i2c:

i2c wiring

The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.

Work in progress...

OLED Configuration

Work in progress...