Inicio Explorar Axuda
Iniciar sesión
cinaeco
/
qmk_firmware
1
0
Fork 0
Ficheiros Incidencias 0 Pull Requests 0 Wiki
Árbore: 732a7f2be9
Ramas Etiquetas
qmk_firmware
/
keyboards
/
lets_split
/
keymaps
/
OLED_sample
ishtob 80270a2791 Add files via upload %!s(int64=9) %!d(string=hai) anos
..
Makefile f0962bce50 Add files via upload %!s(int64=9) %!d(string=hai) anos
config.h f0962bce50 Add files via upload %!s(int64=9) %!d(string=hai) anos
keymap.c f0962bce50 Add files via upload %!s(int64=9) %!d(string=hai) anos
readme.md 80270a2791 Add files via upload %!s(int64=9) %!d(string=hai) anos

readme.md

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

  • I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
  • OLED display will connect from either side

Wiring

The wiring for i2c:

i2c wiring

The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.

Work in progress...

OLED Configuration

Work in progress...