config.h 2.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172
  1. /*
  2. Copyright 2019 John M Daly <jmdaly@gmail.com>
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #pragma once
  15. #include "config_common.h"
  16. /* USB Device descriptor parameter */
  17. #define VENDOR_ID 0xFEED
  18. #define PRODUCT_ID 0x0000
  19. #define DEVICE_VER 0x0001
  20. #define MANUFACTURER John M Daly
  21. #define PRODUCT SteamVan rev1
  22. #define DESCRIPTION An open hardware forty percent PCB
  23. /* Address for jumping to bootloader on STM32 chips. */
  24. /* It is chip dependent, the correct number can be looked up here:
  25. * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
  26. */
  27. #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
  28. /* key matrix size */
  29. #define MATRIX_ROWS 4
  30. #define MATRIX_COLS 12
  31. /* ROWS: Top to bottom, COLS: Left to right
  32. */
  33. #define MATRIX_ROW_PINS { A6, A5, A4, A3 }
  34. #define MATRIX_COL_PINS { A9, A8, B15, B14, B13, A10, B9, B6, B5, B4, B3, A15 }
  35. #define UNUSED_PINS
  36. /* COL2ROW, ROW2COL */
  37. #define DIODE_DIRECTION COL2ROW
  38. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  39. #define DEBOUNCE 5
  40. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  41. #define LOCKING_SUPPORT_ENABLE
  42. /* Locking resynchronize hack */
  43. #define LOCKING_RESYNC_ENABLE
  44. /* Backlight configuration
  45. * Backlight LEDs on B8
  46. */
  47. #define BACKLIGHT_PIN B8
  48. #define BACKLIGHT_BREATHING
  49. #define WS2812_SPI SPID1
  50. #define WS2812_SPI_MOSI_PAL_MODE 5
  51. #define RGBLIGHT_ANIMATIONS
  52. #define RGBLED_NUM 16
  53. #define RGB_DI_PIN A7
  54. #define DRIVER_LED_TOTAL RGBLED_NUM
  55. #define RGB_MATRIX_KEYPRESSES