qmk_firmware/keyboards/claw44/rev1/rev1.h

#pragma once

#include "../claw44.h"

#include "quantum.h"

#ifdef RGBLIGHT_ENABLE
//rgb led driver
#include "ws2812.h"
#endif

#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
	#include <avr/io.h>
	#include <avr/interrupt.h>
#endif
#endif

#define LAYOUT( \
  L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
  L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
  L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
                 L30, L31, L32, L33, R30, R31, R32, R33 \
  ) \
  { \
    { L00, L01, L02, L03, L04, L05 }, \
    { L10, L11, L12, L13, L14, L15 }, \
    { L20, L21, L22, L23, L24, L25 }, \
    { KC_NO, KC_NO, L30, L31, L32, L33 }, \
    { R05, R04, R03, R02, R01, R00 }, \
    { R15, R14, R13, R12, R11, R10 }, \
    { R25, R24, R23, R22, R21, R20 }, \
    { KC_NO, KC_NO, R33, R32, R31, R30 } \
  }

#define LAYOUT_kc( \
  L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
  L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
  L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
                 L30, L31, L32, L33, R30, R31, R32, R33 \
  ) \
  LAYOUT( \
    KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05,                     KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
    KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15,                     KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
    KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25,                     KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
                                  KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \
  )

enum layer_number {
  _QWERTY = 0,
  _LOWER,
  _RAISE,
  _ADJUST,
};