| 123456789101112131415161718192021222324252627282930313233343536373839404142434445 |
- SRC = matrix.c \
- i2c_master.c
- # MCU name
- MCU = atmega328p
- # Bootloader selection
- # Teensy halfkay
- # Pro Micro caterina
- # Atmel DFU atmel-dfu
- # LUFA DFU lufa-dfu
- # QMK DFU qmk-dfu
- # ATmega32A bootloadHID
- # ATmega328P USBasp
- BOOTLOADER = USBasp
- # Flash program via avrdude, but default command is not suitable.
- # You can use plaid:default:program
- PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
- # disable debug code
- OPT_DEFS = -DDEBUG_LEVEL=0
- # Build Options
- # change yes to no to disable
- #
- BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
- MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
- EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
- CONSOLE_ENABLE = no # Console for debug(+400)
- COMMAND_ENABLE = no # Commands for debug and configuration
- # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
- SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
- # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
- NKRO_ENABLE = no # USB Nkey Rollover
- BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
- RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
- MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
- UNICODE_ENABLE = no # Unicode
- BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
- AUDIO_ENABLE = no # Audio output on port C6
- FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
- HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
- CUSTOM_MATRIX = yes
|
