Halaman utama Jelajahi Bantuan
Masuk
cinaeco
/
qmk_firmware
1
0
Fork 0
Berkas Masalah 0 Permintaan Tarik 0 Wiki
Pohon: cd7cba54fe
Ranting Tag
qmk_firmware
/
FAQ.md

FAQ.md 1.2 KB
Riwayat Mentahan

Build

'make clean' needs after changing config.h

To build with new config.h you need

$ make clean

Degug Console

hid_listen can't find device

When debug console of your device is not ready you will see like this:

Waiting for device:.........

once the device is pluged in then hid_listen finds it you will get this message:

Waiting for new device:.........................
Listening:

Check if you can't get this 'Listening:' message:

  • build with CONSOLE_ENABLE=yes in Makefile.

Can't get message from console

Check:

  • connect the device to hid_listen. See above.
  • push LShift+RShift+d to enable debug. See Magic Commands.
  • set debug_enable=yes usually in matrix_init() in matrix.c.
  • try using 'print' function instead of debug print. See common/print.h.
  • disconnect other devices with console function. See Issue #97.

NKRO

PS/2 mouse support

TrackPoint needs reset circuit

Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware.

http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447