Drashna Jaelre
00b6f14821
Replace outdated RGB/Audio information
|
пре 7 година | |
|---|---|---|
| .. | ||
| config.h | пре 7 година | |
| keymap.c | пре 8 година | |
| readme.md | пре 9 година | |
| rules.mk | пре 7 година | |
readme.md
SSD1306 OLED Display via I2C
Features
Some features supported by the firmware:
- I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
- OLED display will connect from either side
Wiring
Work in progress...
OLED Configuration
Work in progress...