Drashna Jaelre 00b6f14821 Replace outdated RGB/Audio information		преди 8 години
..
config.h	743449472e Make `PREVENT_STUCK_MODIFIERS` the default (#3107)	преди 8 години
keymap.c	678fae6cce Reformat 40% Ortho boards to work with Layouts feature (#2804)	преди 8 години
readme.md	2573e581a5 Update readme.md	преди 9 години
rules.mk	00b6f14821 Replace outdated RGB/Audio information	преди 8 години

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
OLED display will connect from either side

Work in progress...

Work in progress...