config.h 2.1 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071
  1. /*
  2. Copyright 2019 Rodrigo Feijao <hello@rodrigofeijao.com>
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #pragma once
  15. #include "config_common.h"
  16. /* USB Device descriptor parameter */
  17. #define VENDOR_ID 0xFEED
  18. #define PRODUCT_ID 0x6363
  19. #define DEVICE_VER 0x0001
  20. #define MANUFACTURER XIUDI
  21. #define PRODUCT XD60rev3
  22. #define DESCRIPTION XD60 rev3 Keyboard PCB by XIUDI
  23. /* key matrix size */
  24. #define MATRIX_ROWS 5
  25. #define MATRIX_COLS 14
  26. /*
  27. * Keyboard Matrix Assignments
  28. *
  29. * Change this to how you wired your keyboard
  30. * COLS: AVR pins used for columns, left to right
  31. * ROWS: AVR pins used for rows, top to bottom
  32. * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
  33. * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  34. *
  35. */
  36. #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
  37. #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
  38. #define UNUSED_PINS
  39. /* Backlight Setup */
  40. #define BACKLIGHT_PIN F5
  41. #define BACKLIGHT_LEVELS 6
  42. /* COL2ROW or ROW2COL */
  43. #define DIODE_DIRECTION COL2ROW
  44. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  45. #define DEBOUNCING_DELAY 5
  46. /* RGB Underglow
  47. * F6 PIN for XD60v3 that has pre-soldered LEDs
  48. */
  49. #define RGB_DI_PIN F6
  50. #define RGBLIGHT_ANIMATIONS
  51. #define RGBLED_NUM 12
  52. #define RGBLIGHT_HUE_STEP 10
  53. #define RGBLIGHT_SAT_STEP 17
  54. #define RGBLIGHT_VAL_STEP 17
  55. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  56. #define LOCKING_SUPPORT_ENABLE
  57. /* Locking resynchronize hack */
  58. #define LOCKING_RESYNC_ENABLE