Acasă Explorează Ajutor
Autentificare
cinaeco
/
qmk_firmware
1
0
Bifurcare 0
Fisiere Probleme 0 Trageți solicitările 0 Wiki
Arbore: 9a64c6b82e
Ramuri Etichete
qmk_firmware
/
keyboards
/
meira
zvecr fc06986989 Remove CUSTOM_MATRIX option from diode direction (#5090) 7 ani în urmă
..
featherble b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301) 7 ani în urmă
keymaps 67adc29aa3 Remove empty fn_actions[] 7 ani în urmă
promicro b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301) 7 ani în urmă
TWIlib.c a9a46adba0 Add support for Meira 8 ani în urmă
TWIlib.h a9a46adba0 Add support for Meira 8 ani în urmă
config.h fc06986989 Remove CUSTOM_MATRIX option from diode direction (#5090) 7 ani în urmă
issi.c a9a46adba0 Add support for Meira 8 ani în urmă
issi.h a9a46adba0 Add support for Meira 8 ani în urmă
lighting.c bd1ad405bf Update Meira for revision 1.1 to enable backlighting by default (#2468) 8 ani în urmă
lighting.h a9a46adba0 Add support for Meira 8 ani în urmă
matrix.c 84a713b05c Remove _quantum functions from custom matrix.c code 8 ani în urmă
meira.c 3ea7c2a434 Remove empty action_function() 7 ani în urmă
meira.h b4bdebab9a Meira updates for bluetooth and audio (#2731) 8 ani în urmă
readme.md c8cbee5d71 Modified URLs to point to new locations 7 ani în urmă
rules.mk 00b6f14821 Replace outdated RGB/Audio information 7 ani în urmă

readme.md

Meira

Miera

A 4x12 ortholinear low-profile keyboard.

Keyboard Maintainer: Cole Markham
Hardware Supported: Meira/ProMicro, Meira/FeatherBLE
Hardware Availability: WoodKeys.click

Two controllers are support: the Pro Micro, and the Adafruit Feather BLE 32u4. Support for each is defined as a hardware revision subfolder in QMK. Main differences include processor frequencies and matrix pinouts.

Make example for this keyboard (after setting up your build environment):

make meira/promicro:default

or

make meira/featherble:default

See build environment setup then the make instructions for more information on generic QMK configuration and setup.

Both the Pro Micro and the Feather BLE use the Catalina bootloader, which is typically programmed using avrdude.

Matrix

In order to have enough pins for the matrix and other functions, a custom matrix is implemented using a demultiplexer to scan the columns. Since the demux is active low, the diodes must be oriented with the cathode connected to the demux pin. When looking at the bottom of the board with the controller at the top right, the cathode mark on the diode should be toward the left.

LED Controller

The in-switch LEDs are driven by an ISSI LED controller (IS31FL3731). The micro controller communicates with this chip using I2C. Individual LED control is possible, but currently only general backlighting support is implemented. This functionality is located in lighting.c, issi.c, and TWILib.c.