ホーム エクスプローラ ヘルプ
サインイン
cinaeco
/
qmk_firmware
1
0
フォーク 0
ファイル 課題 0 プルリクエスト 0 Wiki
ツリー: 99f3321e26
ブランチ タグ
qmk_firmware
/
keyboards
/
ergodox_ez
Drashna Jaelre 6cf574396a [Keyboard] Update default keymaps to use `layer_state_t` (#7444) 6 年 前
..
keymaps 6cf574396a [Keyboard] Update default keymaps to use `layer_state_t` (#7444) 6 年 前
util 8b832c494c [Keyboard] add keymap beautifier for Ergodox EZ (#4393) 6 年 前
190hotfix.sh d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) 8 年 前
config.h 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) 6 年 前
ergodox_ez.c 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) 6 年 前
ergodox_ez.h 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) 6 年 前
info.json 8680c50d07 Removes Erez personally from QMK (#5883) 6 年 前
led_i2c.c 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) 6 年 前
matrix.c cc5edb9eeb Port DEBUG_MATRIX_SCAN_RATE to core (#7029) 6 年 前
post_config.h 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) 6 年 前
readme.md 7d08e48c50 Syntax update (#2660) 7 年 前
rules.mk 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) 6 年 前

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´teensy_loader_cli -mmcu=atmega32u4 -w ergodoxez.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

    • Settings

    You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.