Degug Console

hid_listen can't find device

When debug console of your device is not ready you will see like this:

Waiting for device:.........

once the device is pluged in then hid_listen finds it you will get this message:

Waiting for new device:.........................
Listening:

Check if you can't get this 'Listening:' message:

build with CONSOLE_ENABLE=yes in Makefile.

Can't get message from console

Check:

the device is connected to hid_listen. See above.
push LShift+RShift+d to enable debug. See Magic Commands.
debug_enable=yes Usually in matrix_init() in matrix.c.
try using 'print' function instead of debug print. See common/print.h.
Disconnect other devices with console function. See Issue #97.

NKRO

PS/2 mouse support