qmk_firmware/keyboards/handwired/dactyl

Dactyl

See https://github.com/adereth/dactyl-keyboard

The Dactyl uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

• Build the firmware with make handwired-dactyl-keymapname, for example make handwired-dactyl-default

• This will result in a hex file called handwired_dactyl_keymapname.hex, e.g. handwired_dactyl_default.hex

• Start the teensy loader.

• Load the .hex file into it.

• Put the Teensy in firmware-loading mode:

  • If your current layout has a RESET key, press it.
  • If you lack a RESET key, press the reset button on the Teensy board itself.

• Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

• Build the firmware as above

• Run <path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymap>.hex

• Put the Teensy in firmware-loading mode:

  • If your current layout has a RESET key, press it.
  • If you lack a RESET key, press the reset button on the Teensy board itself.