qmk_firmware/keyboards/clueboard

Clueboard keyboard firmware

DIY/Assembled compact 66% keyboard by Clueboard.

For the full Quantum Mechanical Keyboard feature list, see the parent readme.md.

First Time Setup

Download or clone the whole firmware and navigate to the keyboards/clueboard directory. Once your dev env is setup, you'll be able to generate the default .hex:

$ make

You will see a lot of output and if everything worked correctly you will see something similar to this:

Size after:
   text	   data	    bss	    dec	    hex	filename
      0	  19992	      0	  19992	   4e18	clueboard_rev2_default.hex

At this point you can press RESET on your Clueboard and flash your keyboard with this command:

$ make dfu

If you would like to use one of the alternative keymaps, or create your own, see below.

Clueboard 1.0

If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add SUBPROJECT=rev1 to your make command, like this:

$ make SUBPROJECT=rev1

And when flashing your keyboard:

$ make SUBPROJECT=rev1 dfu

If you are flashing an alternative layout to your rev1, include both SUBPROJECT=rev1 and KEYMAP=<keymap> in your command, for example when flashing max:

$ make SUBPROJECT=rev1 KEYMAP=max dfu

Alternate Keymaps

There are many alternative and user-contributed layouts available in the keymaps/ directory. To compile and flash an alternative you will want to add KEYMAP=<keymap> to your command:

$ make KEYMAP=skully

And when flashing your keyboard, put KEYMAP=<keymap> between "make" and "dfu":

$ make KEYMAP=skully dfu

Notable Layouts

These layouts are notable for one reason or another. If you are looking for ideas or inspiration you should look at these first:

• keymaps/default - The default Clueboard layout
• keymaps/max - A maximised layout that makes use of every key and feature of the Clueboard 2.0 PCB.
• keymaps/skully - The layout that @skullydazed uses on his own Clueboards.

Create Your Own Keymap

There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is Customizing Your Keymap in the main readme.md. As a way to get started, here is the procedure I recommend:

• Copy [keymaps/default](keymaps/default/) to keymaps/<your_layout>.
• Compile the firmware ($ make KEYMAP=<your_layout>)
• Flash the firmware ($ make KEYMAP=<your_layout> dfu)
• Make sure everything works like the default keyboard
• Modify keymaps/<your_layout>/readme.md to tell others about your layout.
• Modify keymaps/<your_layout>/keymap.c to reflect your desired layout.
• Compile your new custom firmware ($ make KEYMAP=<your_layout>) ** If you have warnings you may flash without fixing them, but something may not work right. ** If you have any errors you must fix them before continuing.
• Flash the firmware ($ make KEYMAP=<your_layout> dfu)

Share Your Keymap

Got your layout dialed in? Please share it with the world so we can benefit from your work! Simply submit a pull request with your layout and we'll include it in the official repository. Please use the following guidelines when putting together your pull request:

• Include a readme.md that states what your primary keyboard use is, how your layout differs from the default, and highlights anything you think makes your layout particularly great.
• If your layout requires certain features (EG, RGB underlight or backlighting) ensure you have a Makefile and config.h that reflects that
• If your layout requires special hardware to be added, please describe that in the readme.md

TODO: Write up or link quick how-to on creating and submitting a PR. (Pull requests accepted. :)