Tidy up dztech rules.mk

keyboards/dztech/dz60rgb/v1/rules.mk

@@ -1,14 +1,24 @@
 # MCU name
 MCU = STM32F303
 
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes                  # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb/v2/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = atmega32u4
 
 # Bootloader selection
@@ -10,14 +11,24 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes                 # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb_ansi/v1/rules.mk

@@ -1,14 +1,24 @@
 # MCU name
 MCU = STM32F303
 
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes                  # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb_ansi/v2/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = atmega32u4
 
 # Bootloader selection
@@ -10,14 +11,24 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes                 # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb_wkl/v1/rules.mk

@@ -1,16 +1,26 @@
 # MCU name
 MCU = STM32F303
 
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes                  # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in
 
 LAYOUTS = 60_tsangan_hhkb

keyboards/dztech/dz60rgb_wkl/v2/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = atmega32u4
 
 # Bootloader selection
@@ -10,16 +11,26 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes                 # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in
 
 LAYOUTS = 60_tsangan_hhkb

keyboards/dztech/dz65rgb/v1/rules.mk

@@ -1,14 +1,25 @@
 # MCU name
 MCU = STM32F303
 
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-NKRO_ENABLE = yes                 # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = yes     # Use RGB matrix
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3731 # Use RGB matrix
 
 LAYOUTS = 65_ansi

keyboards/dztech/dz65rgb/v2/rules.mk

@@ -14,22 +14,22 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = lite        # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes          # Mouse keys
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+CONSOLE_ENABLE = no            # Console for debug
+COMMAND_ENABLE = no            # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no          # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI support
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-RGB_MATRIX_ENABLE = yes     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+NKRO_ENABLE = yes              # USB Nkey Rollover
+BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
+MIDI_ENABLE = no               # MIDI support
+BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no              # Audio output on port C6
+FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
+RGB_MATRIX_ENABLE = IS31FL3731 # Use RGB matrix
 
-LAYOUTS = 65_ansi
+LAYOUTS = 65_ansi