Merge upstream/master with userspace

keyboards/crkbd/keymaps/curry/config.h

@@ -0,0 +1,31 @@
+#pragma once
+
+#define MASTER_RIGHT
+#define USE_SERIAL_PD2
+
+#ifdef RGBLIGHT_ENABLE
+#    undef RGBLED_NUM
+#    define RGBLED_NUM 27
+
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 5
+#    define RGBLIGHT_LIMIT_VAL 120
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 5
+#    define RGB_MATRIX_SPD_STEP 10
+#endif
+
+#define OLED_DISABLE_TIMEOUT
+#define TAPPING_TERM_PER_KEY

keyboards/crkbd/keymaps/curry/keymap.c

@@ -0,0 +1,61 @@
+#include "curry.h"
+
+#define LAYOUT_crkbd_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+    KC_GESC, K01, K02, K03, K04, K05,      K06, K07, K08, K09, K0A, KC_MINS, \
+    M_LCTL,  K11, K12, K13, K14, K15,      K16, K17, K18, K19, K1A, M_RALT,  \
+    OS_LSFT, K21, K22, K23, K24, K25,      K26, K27, K28, K29, K2A, OS_RSFT, \
+             KC_GRV, OS_LALT, SP_LWER,     ET_RAIS, KC_BSPC, OS_RGUI                                      \
+  )
+#define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_crkbd_base_wrapper(
+    _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+    _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+    _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+  ),
+
+  [_COLEMAK] = LAYOUT_crkbd_base_wrapper(
+    _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+    _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+    _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+  ),
+
+  [_DVORAK] = LAYOUT_crkbd_base_wrapper(
+    _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+    _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+    _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+  ),
+
+  [_MODS] = LAYOUT_wrapper(
+    _______, ___________________BLANK___________________,       ___________________BLANK___________________, _______,
+    _______, ___________________BLANK___________________,       ___________________BLANK___________________, _______,
+    KC_LSFT, ___________________BLANK___________________,       ___________________BLANK___________________, KC_RSFT,
+                               _______, _______, _______,       _______, _______, _______
+  ),
+  [_LOWER] = LAYOUT_wrapper(
+    _______, _________________LOWER_L1__________________,       _________________LOWER_R1__________________, KC_PIPE,
+    KC_F11,  _________________LOWER_L2__________________,       _________________LOWER_R2__________________, KC_F12,
+    _______, _________________LOWER_L3__________________,       _________________LOWER_R3__________________, _______,
+                               _______, _______, _______,       _______, _______, _______
+  ),
+
+  [_RAISE] = LAYOUT_wrapper( \
+    _______, _________________RAISE_L1__________________,       _________________RAISE_R1__________________, _______,
+    _______, _________________RAISE_L2__________________,       _________________RAISE_R2__________________, KC_BSLS,
+    _______, _________________RAISE_L3__________________,       _________________RAISE_R3__________________, _______,
+                               _______, _______, _______,       _______, _______, _______
+  ),
+
+  [_ADJUST] = LAYOUT_wrapper( \
+    KC_MAKE, _________________ADJUST_L1_________________,       _________________ADJUST_R1_________________, KC_RESET,
+    VRSN,    _________________ADJUST_L2_________________,       _________________ADJUST_R2_________________, EEP_RST,
+    MG_NKRO, _________________ADJUST_L3_________________,       _________________ADJUST_R3_________________, RGB_IDL,
+                               _______, _______, _______,       _______, TG_MODS, _______
+  )
+};

keyboards/crkbd/keymaps/curry/rules.mk

@@ -0,0 +1,22 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE           	= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE            	= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE            	= yes # Audio control and System control(+450)
+CONSOLE_ENABLE             	= no  # Console for debug(+400)
+COMMAND_ENABLE             	= no  # Commands for debug and configuration
+NKRO_ENABLE                	= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE           	= no  # Enable keyboard backlight functionality
+MIDI_ENABLE                	= no  # MIDI controls
+AUDIO_ENABLE               	= no  # Audio output on port C6
+UNICODE_ENABLE             	= no  # Unicode
+BLUETOOTH_ENABLE           	= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE            	= no  # Enable WS2812 RGB underlight.
+SWAP_HANDS_ENABLE          	= no  # Enable one-hand typing
+RGB_MATRIX_ENABLE 		   	= WS2812
+TAP_DANCE_ENABLE			= yes      # Enable Tap Dance.
+OLED_DRIVER_ENABLE			= yes
+BOOTLOADER					= atmel-dfu
+SLEEP_LED_ENABLE 			= no    # Breathing sleep LED during USB suspend

keyboards/lily58/keymaps/curry/config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#define MASTER_LEFT
+#define USE_SERIAL_PD2
+
+#define OLED_DISABLE_TIMEOUT
+#define TAPPING_TERM_PER_KEY

keyboards/lily58/keymaps/curry/keymap.c

@@ -0,0 +1,71 @@
+#include "curry.h"
+
+#define LAYOUT_lily58_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A,  \
+    K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A  \
+  ) \
+  LAYOUT_wrapper( \
+    KC_ESC,  K01, K02, K03, K04, K05,                    K06, K07, K08, K09, K0A, KC_GRV, \
+    KC_TAB,  K11, K12, K13, K14, K15,                    K16, K17, K18, K19, K1A, KC_BSLS,  \
+    KC_LCTL, K21, K22, K23, K24, K25,                    K26, K27, K28, K29, K2A, KC_QUOT, \
+    OS_LSFT, K31, K32, K33, K34, K35, KC_LBRC, KC_RBRC,  K36, K37, K38, K39, K3A, OS_RSFT, \
+             OS_LGUI, OS_LALT, LOWER, KC_SPC,  KC_ENT,  RAISE, KC_BSPC, OS_RGUI \
+  )
+#define LAYOUT_lily58_base_wrapper(...) LAYOUT_lily58_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_QWERTY] = LAYOUT_lily58_base_wrapper(
+        ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________,
+        _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+        _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+        _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+    ),
+
+    [_COLEMAK] = LAYOUT_lily58_base_wrapper(
+        ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________,
+        _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+        _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+        _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+    ),
+
+    [_DVORAK] = LAYOUT_lily58_base_wrapper(
+        ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________,
+        _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+        _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+        _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+    ),
+
+    [_MODS] = LAYOUT_wrapper(
+        _______, ___________________BLANK___________________,                    ___________________BLANK___________________, _______,
+        _______, ___________________BLANK___________________,                    ___________________BLANK___________________, _______,
+        _______, ___________________BLANK___________________,                    ___________________BLANK___________________, _______,
+        KC_LSFT, ___________________BLANK___________________, _______,  _______, ___________________BLANK___________________, KC_RSFT,
+                                   _______, _______, _______, _______,  _______, _______, _______, _______
+    ),
+
+    [_LOWER] = LAYOUT_wrapper( \
+        _______, ___________________BLANK___________________,                    ___________________BLANK___________________, _______,
+        KC_F11,  _________________LOWER_L1__________________,                    _________________LOWER_R1__________________, KC_F12,
+        _______, _________________LOWER_L2__________________,                    _________________LOWER_R2__________________, _______,
+        _______, _________________LOWER_L3__________________, _______,  _______, _________________LOWER_R3__________________, _______,
+                                   _______, _______, _______, _______,  _______, _______, _______, _______
+    ),
+
+    [_RAISE] = LAYOUT_wrapper( \
+        _______, ___________________BLANK___________________,                    ___________________BLANK___________________, _______,
+        _______, _________________RAISE_L1__________________,                    _________________RAISE_R1__________________, _______,
+        _______, _________________RAISE_L2__________________,                    _________________RAISE_R2__________________, _______,
+        _______, _________________RAISE_L3__________________, _______,  _______, _________________RAISE_R3__________________, _______,
+                                   _______, _______, _______, _______,  _______, _______, _______, _______
+    ),
+
+    [_ADJUST] = LAYOUT_wrapper( \
+        _______, ___________________BLANK___________________,                    ___________________BLANK___________________, _______,
+        KC_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, KC_RESET,
+        VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EEP_RST,
+        MG_NKRO, _________________ADJUST_L3_________________, _______,  _______, _________________ADJUST_R3_________________, RGB_IDL,
+                                   _______, _______, _______, _______,  _______, _______, _______, _______
+    ),
+};

keyboards/lily58/keymaps/curry/rules.mk

@@ -0,0 +1,17 @@
+BOOTMAGIC_ENABLE           	= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE            	= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE            	= yes # Audio control and System control(+450)
+CONSOLE_ENABLE             	= no  # Console for debug(+400)
+COMMAND_ENABLE             	= no  # Commands for debug and configuration
+NKRO_ENABLE                	= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE           	= no  # Enable keyboard backlight functionality
+MIDI_ENABLE                	= no  # MIDI controls
+AUDIO_ENABLE               	= no  # Audio output on port C6
+UNICODE_ENABLE             	= no  # Unicode
+BLUETOOTH_ENABLE           	= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE            	= no  # Enable WS2812 RGB underlight.
+SWAP_HANDS_ENABLE          	= no  # Enable one-hand typing
+TAP_DANCE_ENABLE 		   	= yes      # Enable Tap Dance.
+OLED_DRIVER_ENABLE 			= yes
+BOOTLOADER 					= atmel-dfu
+SPLIT_TRANSPORT 			= mirror

users/curry/.gitignore

@@ -0,0 +1 @@
+secrets.c

users/curry/config.h

@@ -0,0 +1,116 @@
+#pragma once
+
+// Use custom magic number so that when switching branches, EEPROM always gets reset
+#define EECONFIG_MAGIC_NUMBER (uint16_t)0x420
+
+/* Set Polling rate to 1000Hz */
+#define USB_POLLING_INTERVAL_MS 1
+
+#ifdef RGBLIGHT_ENABLE
+#    undef RGBLIGHT_ANIMATIONS
+#    if defined(__AVR__) && !defined(__AVR_AT90USB1286__)
+#        define RGBLIGHT_SLEEP
+#        define RGBLIGHT_EFFECT_BREATHING
+#        define RGBLIGHT_EFFECT_SNAKE
+#        define RGBLIGHT_EFFECT_KNIGHT
+#    else
+#        define RGBLIGHT_ANIMATIONS
+#    endif
+#endif  // RGBLIGHT_ENABLE
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses (will slow down matrix scan by a lot)
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+// #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+// #   define EECONFIG_RGB_MATRIX (uint32_t *)16
+
+#    if defined(__AVR__) && !defined(__AVR_AT90USB1286__)
+#        define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#        define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#        define DISABLE_RGB_MATRIX_BREATHING
+#        define DISABLE_RGB_MATRIX_BAND_SAT
+#        define DISABLE_RGB_MATRIX_BAND_VAL
+#        define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#        define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#        define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#        define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#        define DISABLE_RGB_MATRIX_CYCLE_ALL
+#        define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#        define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#        define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+// #       define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#        define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#        define DISABLE_RGB_MATRIX_DUAL_BEACON
+#        define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#        define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
+#        define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#        define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#        define DISABLE_RGB_MATRIX_RAINDROPS
+#        define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// #       define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+#        define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#        define DISABLE_RGB_MATRIX_SPLASH
+#        define DISABLE_RGB_MATRIX_MULTISPLASH
+#        define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#        define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#    endif  // AVR
+#endif      // RGB_MATRIX_ENABLE
+
+#ifndef ONESHOT_TAP_TOGGLE
+#    define ONESHOT_TAP_TOGGLE 2
+#endif  // !ONESHOT_TAP_TOGGLE
+
+#ifndef ONESHOT_TIMEOUT
+#    define ONESHOT_TIMEOUT 3000
+#endif  // !ONESHOT_TIMEOUT
+
+#ifndef QMK_KEYS_PER_SCAN
+#    define QMK_KEYS_PER_SCAN 4
+#endif  // !QMK_KEYS_PER_SCAN
+
+// this makes it possible to do rolling combos (zx) with keys that
+// convert to other keys on hold (z becomes ctrl when you hold it,
+// and when this option isn't enabled, z rapidly followed by x
+// actually sends Ctrl-x. That's bad.)
+#define IGNORE_MOD_TAP_INTERRUPT
+#undef PERMISSIVE_HOLD
+//#define TAPPING_FORCE_HOLD
+//#define RETRO_TAPPING
+
+#define FORCE_NKRO
+
+#ifndef TAPPING_TOGGLE
+#    define TAPPING_TOGGLE 1
+#endif
+
+#ifdef TAPPING_TERM
+#    undef TAPPING_TERM
+#endif  // TAPPING_TERM
+#if defined(KEYBOARD_ergodox_ez)
+#    define TAPPING_TERM 185
+#elif defined(KEYBOARD_crkbd)
+#    define TAPPING_TERM 200
+#else
+#    define TAPPING_TERM 175
+#endif
+
+#define TAP_CODE_DELAY 5
+
+/* Disable unused and unneeded features to reduce on firmware size */
+#ifdef LOCKING_SUPPORT_ENABLE
+#    undef LOCKING_SUPPORT_ENABLE
+#endif
+#ifdef LOCKING_RESYNC_ENABLE
+#    undef LOCKING_RESYNC_ENABLE
+#endif

users/curry/curry.c

@@ -0,0 +1,131 @@
+#include "curry.h"
+
+userspace_config_t userspace_config;
+
+#define CURRY_UNICODE_MODE 1
+
+void bootmagic_lite(void) {
+    matrix_scan();
+#if defined(DEBOUNCING_DELAY) && DEBOUNCING_DELAY > 0
+    wait_ms(DEBOUNCING_DELAY * 2);
+#elif defined(DEBOUNCE) && DEBOUNCE > 0
+    wait_ms(DEBOUNCE * 2);
+#else
+    wait_ms(30);
+#endif
+    matrix_scan();
+    if (matrix_get_row(BOOTMAGIC_LITE_ROW) & (1 << BOOTMAGIC_LITE_COLUMN)) {
+        bootloader_jump();
+    }
+}
+
+__attribute__((weak)) void keyboard_pre_init_keymap(void) {}
+
+void keyboard_pre_init_user(void) {
+    userspace_config.raw = eeconfig_read_user();
+    keyboard_pre_init_keymap();
+}
+
+__attribute__((weak)) void matrix_init_keymap(void) {}
+
+// Call user matrix init, set default RGB colors and then
+// call the keymap's init function
+void matrix_init_user(void) {
+#if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE))
+    set_unicode_input_mode(CURRY_UNICODE_MODE);
+    get_unicode_input_mode();
+#endif  // UNICODE_ENABLE
+    matrix_init_keymap();
+}
+
+__attribute__((weak)) void keyboard_post_init_keymap(void) {}
+
+void keyboard_post_init_user(void) {
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+    keyboard_post_init_rgb();
+#endif
+    keyboard_post_init_keymap();
+}
+
+__attribute__((weak)) void shutdown_keymap(void) {}
+
+void rgb_matrix_update_pwm_buffers(void);
+
+// On RESET, set all RGB to red, shutdown the keymap.
+void shutdown_user(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_enable_noeeprom();
+    rgblight_mode_noeeprom(1);
+    rgblight_setrgb_red();
+#endif  // RGBLIGHT_ENABLE
+#ifdef RGB_MATRIX_ENABLE
+    rgb_matrix_set_color_all(0xFF, 0x00, 0x00);
+    rgb_matrix_update_pwm_buffers();
+#endif  // RGB_MATRIX_ENABLE
+    shutdown_keymap();
+}
+
+__attribute__((weak)) void suspend_power_down_keymap(void) {}
+
+void suspend_power_down_user(void) { suspend_power_down_keymap(); }
+
+__attribute__((weak)) void suspend_wakeup_init_keymap(void) {}
+
+void suspend_wakeup_init_user(void) { suspend_wakeup_init_keymap(); }
+
+__attribute__((weak)) void matrix_scan_keymap(void) {}
+
+// No global matrix scan code, so just run keymap's matrix
+// scan function
+void matrix_scan_user(void) {
+    static bool has_ran_yet;
+    if (!has_ran_yet) {
+        has_ran_yet = true;
+        startup_user();
+    }
+
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+    matrix_scan_rgb();
+#endif  // RGBLIGHT_ENABLE
+
+    matrix_scan_keymap();
+}
+
+__attribute__((weak)) layer_state_t layer_state_set_keymap(layer_state_t state) { return state; }
+
+// On Layer change, run keymap's layer change check
+layer_state_t layer_state_set_user(layer_state_t state) {
+    state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+    state = layer_state_set_rgb(state);
+#endif  // RGBLIGHT_ENABLE
+    return layer_state_set_keymap(state);
+}
+
+__attribute__((weak)) layer_state_t default_layer_state_set_keymap(layer_state_t state) { return state; }
+
+// Runs state check and changes underglow color and animation
+layer_state_t default_layer_state_set_user(layer_state_t state) {
+    return default_layer_state_set_keymap(state);
+}
+
+__attribute__((weak)) void led_set_keymap(uint8_t usb_led) {}
+
+// Any custom LED code goes here.
+void led_set_user(uint8_t usb_led) { led_set_keymap(usb_led); }
+
+__attribute__((weak)) void eeconfig_init_keymap(void) {}
+
+void eeconfig_init_user(void) {
+    userspace_config.raw              = 0;
+    userspace_config.rgb_layer_change = true;
+    eeconfig_update_user(userspace_config.raw);
+#if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE))
+    set_unicode_input_mode(CURRY_UNICODE_MODE);
+    get_unicode_input_mode();
+#else
+    eeprom_update_byte(EECONFIG_UNICODEMODE, CURRY_UNICODE_MODE);
+#endif
+    eeconfig_init_keymap();
+    keyboard_init();
+}

users/curry/curry.h

@@ -0,0 +1,57 @@
+#pragma once
+
+#include QMK_KEYBOARD_H
+
+#include "version.h"
+#include "eeprom.h"
+#include "wrappers.h"
+#include "process_records.h"
+
+#ifdef TAP_DANCE_ENABLE
+#    include "tap_dances.h"
+#endif  // TAP_DANCE_ENABLE
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+#    include "rgb_stuff.h"
+#endif
+#if defined(KEYBOARD_lily58_rev1) & defined(PROTOCOL_LUFA)
+#    include "lufa.h"
+#    include "split_util.h"
+#endif
+
+/* Define layer names */
+enum userspace_layers {
+    _QWERTY  = 0,
+    _NUMLOCK = 0,
+    _COLEMAK,
+    _DVORAK,
+    _MODS,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+void          matrix_init_keymap(void);
+void          shutdown_keymap(void);
+void          suspend_power_down_keymap(void);
+void          suspend_wakeup_init_keymap(void);
+void          matrix_scan_keymap(void);
+layer_state_t layer_state_set_keymap(layer_state_t state);
+layer_state_t default_layer_state_set_keymap(layer_state_t state);
+void          led_set_keymap(uint8_t usb_led);
+void          eeconfig_init_keymap(void);
+
+// clang-format off
+typedef union {
+    uint32_t raw;
+    struct {
+        bool    rgb_layer_change     :1;
+        bool    is_overwatch         :1;
+        bool    nuke_switch          :1;
+        uint8_t unicode_mod          :4;
+        bool    swapped_numbers      :1;
+        bool    rgb_matrix_idle_anim :1;
+    };
+} userspace_config_t;
+// clang-format on
+
+extern userspace_config_t userspace_config;

users/curry/oled.c

@@ -0,0 +1,162 @@
+#include "curry.h"
+
+#ifdef OLED_DRIVER_ENABLE
+#define KEYLOGGER_LENGTH 5
+static uint32_t oled_timer                       = 0;
+static char     keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"};
+static uint16_t log_timer                        = 0;
+// clang-format off
+static const char PROGMEM code_to_name[0xFF] = {
+//   0    1    2    3    4    5    6    7    8    9    A    B    c    D    E    F
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',  // 0x
+    'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2',  // 1x
+    '3', '4', '5', '6', '7', '8', '9', '0',  20,  19,  27,  26,  22, '-', '=', '[',  // 2x
+    ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ',  // 3x
+    ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ',  16, ' ', ' ', ' ',  // 4x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 5x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 6x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 7x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 8x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 9x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ax
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Bx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Cx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Dx
+    'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ex
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' '        // Fx
+};
+
+void add_keylog(uint16_t keycode);
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
+
+void add_keylog(uint16_t keycode) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX) || (keycode >= QK_MODS && keycode <= QK_MODS_MAX)) {
+        keycode = keycode & 0xFF;
+    } else if (keycode > 0xFF) {
+        keycode = 0;
+    }
+
+    for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) {
+        keylog_str[i] = keylog_str[i - 1];
+    }
+
+    if (keycode < (sizeof(code_to_name) / sizeof(char))) {
+        keylog_str[0] = pgm_read_byte(&code_to_name[keycode]);
+    }
+
+    log_timer = timer_read();
+}
+
+void render_keylogger_status(void) {
+    oled_write_P(PSTR("Keys"), false);
+    oled_write(keylog_str, false);
+}
+
+void render_default_layer_state(void) {
+    oled_write_P(PSTR("Lyout"), false);
+    switch (get_highest_layer(default_layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR(" QRTY"), false);
+            break;
+        case _COLEMAK:
+            oled_write_P(PSTR(" COLE"), false);
+            break;
+        case _DVORAK:
+            oled_write_P(PSTR(" DVRK"), false);
+            break;
+    }
+}
+
+void render_layer_state(void) {
+    oled_write_P(PSTR("LAYER"), false);
+    oled_write_P(PSTR("Lower"), layer_state_is(_LOWER));
+    oled_write_P(PSTR("Raise"), layer_state_is(_RAISE));
+    oled_write_P(PSTR(" Mods"), layer_state_is(_MODS));
+}
+
+void render_keylock_status(uint8_t led_usb_state) {
+    oled_write_P(PSTR("Lock:"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+}
+
+void render_mod_status(uint8_t modifiers) {
+    oled_write_P(PSTR("Mods:"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("S"), (modifiers & MOD_MASK_SHIFT));
+    oled_write_P(PSTR("C"), (modifiers & MOD_MASK_CTRL));
+    oled_write_P(PSTR("A"), (modifiers & MOD_MASK_ALT));
+    oled_write_P(PSTR("G"), (modifiers & MOD_MASK_GUI));
+}
+
+void render_bootmagic_status(void) {
+    /* Show Ctrl-Gui Swap options */
+    static const char PROGMEM logo[][2][3] = {
+        {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+        {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+    };
+    oled_write_P(PSTR("BTMGK"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" NKRO"), keymap_config.nkro);
+}
+
+void render_user_status(void) {
+    oled_write_P(PSTR("USER:"), false);
+    oled_write_P(PSTR(" Anim"), userspace_config.rgb_matrix_idle_anim);
+    oled_write_P(PSTR(" Layr"), userspace_config.rgb_layer_change);
+    oled_write_P(PSTR(" Nuke"), userspace_config.nuke_switch);
+}
+
+void render_status_main(void) {
+    /* Show Keyboard Layout  */
+    render_default_layer_state();
+    render_keylock_status(host_keyboard_leds());
+    render_bootmagic_status();
+    render_user_status();
+
+    render_keylogger_status();
+}
+
+void render_status_secondary(void) {
+    /* Show Keyboard Layout  */
+    render_default_layer_state();
+    render_layer_state();
+    render_mod_status(get_mods() | get_oneshot_mods());
+
+    render_keylogger_status();
+}
+
+void oled_task_user(void) {
+    if (timer_elapsed32(oled_timer) > 30000) {
+        oled_off();
+        return;
+    }
+#    ifndef SPLIT_KEYBOARD
+    else {
+        oled_on();
+    }
+#    endif
+    if (is_keyboard_master()) {
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_status_secondary();
+    }
+}
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        oled_timer = timer_read32();
+        add_keylog(keycode);
+    }
+    return true;
+}
+
+#endif

users/curry/process_records.c

@@ -0,0 +1,85 @@
+#include "curry.h"
+
+uint16_t copy_paste_timer;
+
+__attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; }
+
+__attribute__((weak)) bool process_record_secrets(uint16_t keycode, keyrecord_t *record) { return true; }
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+    switch (keycode) {
+        case KC_MAKE:
+            if (!record->event.pressed) {
+                uint8_t temp_mod = mod_config(get_mods());
+                uint8_t temp_osm = mod_config(get_oneshot_mods());
+                clear_mods();
+                clear_oneshot_mods();
+                send_string_with_delay_P(PSTR("make " QMK_KEYBOARD ":" QMK_KEYMAP), TAP_CODE_DELAY);
+                if ((temp_mod | temp_osm) & MOD_MASK_SHIFT) {
+                    send_string_with_delay_P(PSTR(":flash"), TAP_CODE_DELAY);
+                }
+                if ((temp_mod | temp_osm) & MOD_MASK_CTRL) {
+                    send_string_with_delay_P(PSTR(" -j8 --output-sync"), TAP_CODE_DELAY);
+                }
+#ifdef RGB_MATRIX_SPLIT_RIGHT
+                send_string_with_delay_P(PSTR(" RGB_MATRIX_SPLIT_RIGHT=yes"), TAP_CODE_DELAY);
+#    ifndef OLED_DRIVER_ENABLE
+                send_string_with_delay_P(PSTR(" OLED_DRIVER_ENABLE=no"), TAP_CODE_DELAY);
+#    endif
+#endif
+                send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), TAP_CODE_DELAY);
+            }
+
+            break;
+
+        case VRSN:  // Prints firmware version
+            if (record->event.pressed) {
+                send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), TAP_CODE_DELAY);
+            }
+            break;
+
+        case KC_CCCV:  // One key copy/paste
+            if (record->event.pressed) {
+                copy_paste_timer = timer_read();
+            } else {
+                if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) {  // Hold, copy
+                    register_code(KC_LCTL);
+                    tap_code(KC_C);
+                    unregister_code(KC_LCTL);
+                } else {  // Tap, paste
+                    register_code(KC_LCTL);
+                    tap_code(KC_V);
+                    unregister_code(KC_LCTL);
+                }
+            }
+            break;
+#ifdef UNICODE_ENABLE
+        case UC_FLIP:  // (ノಠ痊ಠ)ノ彡┻━┻
+            if (record->event.pressed) {
+                send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B");
+            }
+            break;
+        case UC_TABL:  // ┬─┬ノ( º _ ºノ)
+            if (record->event.pressed) {
+                send_unicode_hex_string("252C 2500 252C 30CE 0028 0020 00BA 0020 005F 0020 00BA 30CE 0029");
+            }
+            break;
+        case UC_SHRG:  // ¯\_(ツ)_/¯
+            if (record->event.pressed) {
+                send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF");
+            }
+            break;
+        case UC_DISA:  // ಠ_ಠ
+            if (record->event.pressed) {
+                send_unicode_hex_string("0CA0 005F 0CA0");
+            }
+            break;
+#endif
+    }
+    return process_record_keymap(keycode, record) &&
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+           process_record_user_rgb(keycode, record) &&
+#endif  // RGBLIGHT_ENABLE
+           process_record_secrets(keycode, record);
+}

users/curry/process_records.h

@@ -0,0 +1,104 @@
+#pragma once
+#include "curry.h"
+
+#if defined(KEYMAP_SAFE_RANGE)
+#    define PLACEHOLDER_SAFE_RANGE KEYMAP_SAFE_RANGE
+#else
+#    define PLACEHOLDER_SAFE_RANGE SAFE_RANGE
+#endif
+
+enum userspace_custom_keycodes {
+    VRSN = PLACEHOLDER_SAFE_RANGE,  // Prints QMK Firmware and board info
+    KC_QWERTY,                      // Sets default layer to QWERTY
+    KC_COLEMAK,                     // Sets default layer to COLEMAK
+    KC_DVORAK,                      // Sets default layer to DVORAK
+    KC_MAKE,                        // Run keyboard's customized make command
+    KC_RGB_T,                       // Toggles RGB Layer Indication mode
+    RGB_IDL,                        // RGB Idling animations
+    KC_SECRET_1,                    // test1
+    KC_SECRET_2,                    // test2
+    KC_SECRET_3,                    // test3
+    KC_SECRET_4,                    // test4
+    KC_SECRET_5,                    // test5
+    KC_CCCV,                        // Hold to copy, tap to paste
+    KC_NUKE,                        // NUCLEAR LAUNCH DETECTED!!!
+    UC_FLIP,                        // (ಠ痊ಠ)┻━┻
+    UC_TABL,                        // ┬─┬ノ( º _ ºノ)
+    UC_SHRG,                        // ¯\_(ツ)_/¯
+    UC_DISA,                        // ಠ_ಠ
+    KC_DT1,
+    KC_DT2,
+    KC_DT3,
+    KC_DT4,
+    NEW_SAFE_RANGE                  // use "NEWPLACEHOLDER for keymap specific codes
+};
+
+bool process_record_secrets(uint16_t keycode, keyrecord_t *record);
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record);
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+#define TG_MODS TG(_MODS)
+#define OS_LWR OSL(_LOWER)
+#define OS_RSE OSL(_RAISE)
+
+#define KC_SEC1 KC_SECRET_1
+#define KC_SEC2 KC_SECRET_2
+#define KC_SEC3 KC_SECRET_3
+#define KC_SEC4 KC_SECRET_4
+#define KC_SEC5 KC_SECRET_5
+
+#define QWERTY KC_QWERTY
+#define DVORAK KC_DVORAK
+#define COLEMAK KC_COLEMAK
+
+#define KC_RESET RESET
+#define KC_RST KC_RESET
+
+#ifdef SWAP_HANDS_ENABLE
+#    define KC_C1R3 SH_T(KC_TAB)
+#else  // SWAP_HANDS_ENABLE
+#    define KC_C1R3 KC_TAB
+#endif  // SWAP_HANDS_ENABLE
+
+#define BK_LWER LT(_LOWER, KC_BSPC)
+#define SP_LWER LT(_LOWER, KC_SPC)
+#define DL_RAIS LT(_RAISE, KC_DEL)
+#define ET_RAIS LT(_RAISE, KC_ENTER)
+
+/* OSM keycodes, to keep things clean and easy to change */
+#define KC_MLSF OSM(MOD_LSFT)
+#define KC_MRSF OSM(MOD_RSFT)
+
+#define OS_LGUI OSM(MOD_LGUI)
+#define OS_RGUI OSM(MOD_RGUI)
+#define OS_LSFT OSM(MOD_LSFT)
+#define OS_RSFT OSM(MOD_RSFT)
+#define OS_LCTL OSM(MOD_LCTL)
+#define OS_RCTL OSM(MOD_RCTL)
+#define OS_LALT OSM(MOD_LALT)
+#define OS_RALT OSM(MOD_RALT)
+#define OS_MEH OSM(MOD_MEH)
+#define OS_HYPR OSM(MOD_HYPR)
+
+#define M_LALT ALT_T(KC_TAB)
+#define M_RALT RALT_T(KC_QUOT)
+
+#define M_LCTL CTL_T(KC_TAB)
+#define M_RCTL RCTL_T(KC_QUOT)
+
+#define MT_ESC MT(MOD_LCTL, KC_ESC)
+
+#define ALT_APP ALT_T(KC_APP)
+
+#define MG_NKRO MAGIC_TOGGLE_NKRO
+
+#define UC_IRNY UC(0x2E2E)
+#define UC_CLUE UC(0x203D)
+
+// KWin Window Switching
+#define KC_DT1 LCTL(KC_F1)
+#define KC_DT2 LCTL(KC_F2)
+#define KC_DT3 LCTL(KC_F3)
+#define KC_DT4 LCTL(KC_F4)

users/curry/rgb_stuff.c

@@ -0,0 +1,471 @@
+#include "curry.h"
+#include "rgb_stuff.h"
+#include "eeprom.h"
+
+#if defined(RGBLIGHT_ENABLE)
+extern rgblight_config_t rgblight_config;
+bool                     has_initialized;
+
+void rgblight_sethsv_default_helper(uint8_t index) { rgblight_sethsv_at(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, index); }
+#endif  // RGBLIGHT_ENABLE
+
+#if defined(RGB_MATRIX_ENABLE)
+static uint32_t hypno_timer;
+#    if defined(SPLIT_KEYBOARD) || defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_crkbd)
+#        define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    else
+#        define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN
+#    endif
+
+void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); }
+
+void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); }
+
+void check_default_layer(uint8_t mode, uint8_t type) {
+    switch (get_highest_layer(default_layer_state)) {
+        case _QWERTY:
+            rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type);
+            break;
+        case _COLEMAK:
+            rgb_matrix_layer_helper(HSV_MAGENTA, mode, rgb_matrix_config.speed, type);
+            break;
+        case _DVORAK:
+            rgb_matrix_layer_helper(HSV_SPRINGGREEN, mode, rgb_matrix_config.speed, type);
+            break;
+    }
+}
+
+void rgb_matrix_indicators_user(void) {
+    if (userspace_config.rgb_layer_change &&
+#    ifdef RGB_DISABLE_WHEN_USB_SUSPENDED
+        !g_suspend_state &&
+#    endif
+#    if defined(RGBLIGHT_ENABLE)
+        (!rgblight_config.enable && rgb_matrix_config.enable)
+#    else
+        rgb_matrix_config.enable
+#    endif
+    ) {
+        switch (get_highest_layer(layer_state)) {
+            case _RAISE:
+                rgb_matrix_layer_helper(HSV_YELLOW, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
+            case _LOWER:
+                rgb_matrix_layer_helper(HSV_GREEN, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
+            case _ADJUST:
+                rgb_matrix_layer_helper(HSV_RED, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
+            default: {
+                check_default_layer(IS_LAYER_ON(_MODS), LED_FLAG_UNDERGLOW);
+                break;
+            }
+        }
+        check_default_layer(0, LED_FLAG_MODIFIER);
+    }
+}
+#endif
+
+/* Custom indicators for modifiers.
+ * This allows for certain lights to be lit up, based on what mods are active, giving some visual feedback.
+ * This is especially useful for One Shot Mods, since it's not always obvious if they're still lit up.
+ */
+#ifdef RGBLIGHT_ENABLE
+#    ifdef INDICATOR_LIGHTS
+void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) {
+    if (userspace_config.rgb_layer_change && get_highest_layer(layer_state) == 0) {
+        if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) {
+#        ifdef SHFT_LED1
+            rgblight_sethsv_at(120, 255, 255, SHFT_LED1);
+#        endif  // SHFT_LED1
+#        ifdef SHFT_LED2
+            rgblight_sethsv_at(120, 255, 255, SHFT_LED2);
+#        endif  // SHFT_LED2
+        } else {
+#        ifdef SHFT_LED1
+            rgblight_sethsv_default_helper(SHFT_LED1);
+#        endif  // SHFT_LED1
+#        ifdef SHFT_LED2
+            rgblight_sethsv_default_helper(SHFT_LED2);
+#        endif  // SHFT_LED2
+        }
+        if ((this_mod | this_osm) & MOD_MASK_CTRL) {
+#        ifdef CTRL_LED1
+            rgblight_sethsv_at(0, 255, 255, CTRL_LED1);
+#        endif  // CTRL_LED1
+#        ifdef CTRL_LED2
+            rgblight_sethsv_at(0, 255, 255, CTRL_LED2);
+#        endif  // CTRL_LED2
+        } else {
+#        ifdef CTRL_LED1
+            rgblight_sethsv_default_helper(CTRL_LED1);
+#        endif  // CTRL_LED1
+#        ifdef CTRL_LED2
+            rgblight_sethsv_default_helper(CTRL_LED2);
+#        endif  // CTRL_LED2
+        }
+        if ((this_mod | this_osm) & MOD_MASK_GUI) {
+#        ifdef GUI_LED1
+            rgblight_sethsv_at(51, 255, 255, GUI_LED1);
+#        endif  // GUI_LED1
+#        ifdef GUI_LED2
+            rgblight_sethsv_at(51, 255, 255, GUI_LED2);
+#        endif  // GUI_LED2
+        } else {
+#        ifdef GUI_LED1
+            rgblight_sethsv_default_helper(GUI_LED1);
+#        endif  // GUI_LED1
+#        ifdef GUI_LED2
+            rgblight_sethsv_default_helper(GUI_LED2);
+#        endif  // GUI_LED2
+        }
+        if ((this_mod | this_osm) & MOD_MASK_ALT) {
+#        ifdef ALT_LED1
+            rgblight_sethsv_at(240, 255, 255, ALT_LED1);
+#        endif  // ALT_LED1
+#        ifdef GUI_LED2
+            rgblight_sethsv_at(240, 255, 255, ALT_LED2);
+#        endif  // GUI_LED2
+        } else {
+#        ifdef GUI_LED1
+            rgblight_sethsv_default_helper(ALT_LED1);
+#        endif  // GUI_LED1
+#        ifdef GUI_LED2
+            rgblight_sethsv_default_helper(ALT_LED2);
+#        endif  // GUI_LED2
+        }
+    }
+}
+
+/* Function for the indicators */
+void matrix_scan_indicator(void) {
+    if (has_initialized) {
+        set_rgb_indicators(get_mods(), host_keyboard_leds(), get_oneshot_mods());
+    }
+}
+#    endif  // INDICATOR_LIGHTS
+
+#    ifdef RGBLIGHT_TWINKLE
+static rgblight_fadeout lights[RGBLED_NUM];
+
+__attribute__((weak)) bool rgblight_twinkle_is_led_used_keymap(uint8_t index) { return false; }
+
+/* This function checks for used LEDs.  This way, collisions don't occur and cause weird rendering */
+bool rgblight_twinkle_is_led_used(uint8_t index) {
+    switch (index) {
+#        ifdef INDICATOR_LIGHTS
+#            ifdef SHFT_LED1
+        case SHFT_LED1:
+            return true;
+#            endif  // SHFT_LED1
+#            ifdef SHFT_LED2
+        case SHFT_LED2:
+            return true;
+#            endif  // SHFT_LED2
+#            ifdef CTRL_LED1
+        case CTRL_LED1:
+            return true;
+#            endif  // CTRL_LED1
+#            ifdef CTRL_LED2
+        case CTRL_LED2:
+            return true;
+#            endif  // CTRL_LED2
+#            ifdef GUI_LED1
+        case GUI_LED1:
+            return true;
+#            endif  // GUI_LED1
+#            ifdef GUI_LED2
+        case GUI_LED2:
+            return true;
+#            endif  // GUI_LED2
+#            ifdef ALT_LED1
+        case ALT_LED1:
+            return true;
+#            endif  // ALT_LED1
+#            ifdef ALT_LED2
+        case ALT_LED2:
+            return true;
+#            endif  // ALT_LED2
+#        endif      // INDICATOR_LIGHTS
+        default:
+            return rgblight_twinkle_is_led_used_keymap(index);
+    }
+}
+
+/* Handler for fading/twinkling effect */
+void scan_rgblight_fadeout(void) {  // Don't effing change this function .... rgblight_sethsv is supppppper intensive
+    bool litup = false;
+    for (uint8_t light_index = 0; light_index < RGBLED_NUM; ++light_index) {
+        if (lights[light_index].enabled && timer_elapsed(lights[light_index].timer) > 10) {
+            rgblight_fadeout *light = &lights[light_index];
+            litup                   = true;
+
+            if (light->life) {
+                light->life -= 1;
+                if (get_highest_layer(layer_state) == 0) {
+                    sethsv(light->hue + rand() % 0xF, 255, light->life, (LED_TYPE *)&led[light_index]);
+                }
+                light->timer = timer_read();
+            } else {
+                if (light->enabled && get_highest_layer(layer_state) == 0) {
+                    rgblight_sethsv_default_helper(light_index);
+                }
+                litup = light->enabled = false;
+            }
+        }
+    }
+    if (litup && get_highest_layer(layer_state) == 0) {
+        rgblight_set();
+    }
+}
+
+/* Triggers a LED to fade/twinkle.
+ * This function handles the selection of the LED and prepres for it to be used.
+ */
+void start_rgb_light(void) {
+    uint8_t indices[RGBLED_NUM];
+    uint8_t indices_count  = 0;
+    uint8_t min_life       = 0xFF;
+    uint8_t min_life_index = -1;
+    for (uint8_t index = 0; index < RGBLED_NUM; ++index) {
+        if (rgblight_twinkle_is_led_used(index)) {
+            continue;
+        }
+        if (lights[index].enabled) {
+            if (min_life_index == -1 || lights[index].life < min_life) {
+                min_life       = lights[index].life;
+                min_life_index = index;
+            }
+            continue;
+        }
+
+        indices[indices_count] = index;
+        ++indices_count;
+    }
+
+    uint8_t light_index;
+    if (!indices_count) {
+        light_index = min_life_index;
+    } else {
+        light_index = indices[rand() % indices_count];
+    }
+
+    rgblight_fadeout *light = &lights[light_index];
+    light->enabled          = true;
+    light->timer            = timer_read();
+    light->life             = 0xC0 + rand() % 0x40;
+
+    light->hue = rgblight_config.hue + (rand() % 0xB4) - 0x54;
+
+    rgblight_sethsv_at(light->hue, 255, light->life, light_index);
+}
+#    endif
+#endif  // RGBLIGHT_ENABLE
+
+bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
+    uint16_t temp_keycode = keycode;
+    // Filter out the actual keycode from MT and LT keys.
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+        temp_keycode &= 0xFF;
+    }
+
+#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
+    hypno_timer = timer_read32();
+    if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_REST_MODE) {
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
+    }
+#endif
+
+    switch (temp_keycode) {
+#ifdef RGBLIGHT_TWINKLE
+        case KC_A ... KC_SLASH:
+        case KC_F1 ... KC_F12:
+        case KC_INSERT ... KC_UP:
+        case KC_KP_SLASH ... KC_KP_DOT:
+        case KC_F13 ... KC_F24:
+        case KC_AUDIO_MUTE ... KC_MEDIA_REWIND:
+            if (record->event.pressed) {
+                start_rgb_light();
+            }
+            break;
+#endif                  // RGBLIGHT_TWINKLE
+        case KC_RGB_T:  // This allows me to use underglow as layer indication, or as normal
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+            if (record->event.pressed) {
+                userspace_config.rgb_layer_change ^= 1;
+                dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
+                eeconfig_update_user(userspace_config.raw);
+                if (userspace_config.rgb_layer_change) {
+                    layer_state_set(layer_state);  // This is needed to immediately set the layer color (looks better)
+                }
+            }
+#endif  // RGBLIGHT_ENABLE
+            break;
+        case RGB_IDL:  // This allows me to use underglow as layer indication, or as normal
+#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
+            if (record->event.pressed) {
+                userspace_config.rgb_matrix_idle_anim ^= 1;
+                dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
+                eeconfig_update_user(userspace_config.raw);
+                if (userspace_config.rgb_matrix_idle_anim) {
+                    rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
+                }
+            }
+#endif
+            break;
+        case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT:  // quantum_keycodes.h L400 for definitions
+            if (record->event.pressed) {
+                bool is_eeprom_updated = false;
+#ifdef RGBLIGHT_ENABLE
+                // This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
+                if (userspace_config.rgb_layer_change) {
+                    userspace_config.rgb_layer_change = false;
+                    dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
+                    is_eeprom_updated = true;
+                }
+#endif
+#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
+                if (userspace_config.rgb_matrix_idle_anim) {
+                    userspace_config.rgb_matrix_idle_anim = false;
+                    dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim);
+                    is_eeprom_updated = true;
+                }
+#endif
+                if (is_eeprom_updated) {
+                    eeconfig_update_user(userspace_config.raw);
+                }
+            }
+            break;
+    }
+    return true;
+}
+
+void keyboard_post_init_rgb(void) {
+#if defined(RGBLIGHT_ENABLE)
+#    if defined(RGBLIGHT_STARTUP_ANIMATION)
+    bool is_enabled = rgblight_config.enable;
+    if (userspace_config.rgb_layer_change) {
+        rgblight_enable_noeeprom();
+    }
+    if (rgblight_config.enable) {
+        layer_state_set_user(layer_state);
+        uint16_t old_hue = rgblight_config.hue;
+        rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
+        for (uint16_t i = 255; i > 0; i--) {
+            rgblight_sethsv_noeeprom((i + old_hue) % 255, 255, 255);
+            matrix_scan();
+            wait_ms(10);
+        }
+    }
+    if (!is_enabled) {
+        rgblight_disable_noeeprom();
+    }
+
+#    endif
+    layer_state_set_user(layer_state);
+#endif
+#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
+    if (userspace_config.rgb_matrix_idle_anim) {
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
+    }
+#endif
+}
+
+void matrix_scan_rgb(void) {
+#ifdef RGBLIGHT_ENABLE
+#    ifdef RGBLIGHT_TWINKLE
+    scan_rgblight_fadeout();
+#    endif  // RGBLIGHT_ENABLE
+
+#    ifdef INDICATOR_LIGHTS
+    matrix_scan_indicator();
+#    endif
+#endif
+
+#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
+    if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_TYPING_HEATMAP && timer_elapsed32(hypno_timer) > 15000) {
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
+    }
+#endif
+}
+
+#ifdef RGBLIGHT_ENABLE
+void rgblight_set_hsv_and_mode(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode) {
+    rgblight_sethsv_noeeprom(hue, sat, val);
+    wait_us(175);  // Add a slight delay between color and mode to ensure it's processed correctly
+    rgblight_mode_noeeprom(mode);
+}
+#endif
+
+layer_state_t layer_state_set_rgb(layer_state_t state) {
+#ifdef RGBLIGHT_ENABLE
+    if (userspace_config.rgb_layer_change) {
+        switch (get_highest_layer(state)) {
+            case _RAISE:
+                rgblight_set_hsv_and_mode(HSV_YELLOW, RGBLIGHT_MODE_BREATHING + 3);
+                break;
+            case _LOWER:
+                rgblight_set_hsv_and_mode(HSV_GREEN, RGBLIGHT_MODE_BREATHING + 3);
+                break;
+            case _ADJUST:
+                rgblight_set_hsv_and_mode(HSV_RED, RGBLIGHT_MODE_KNIGHT + 2);
+                break;
+            default:  //  for any other layers, or the default layer
+            {
+                uint8_t mode = get_highest_layer(state) == _MODS ? RGBLIGHT_MODE_BREATHING : RGBLIGHT_MODE_STATIC_LIGHT;
+                switch (get_highest_layer(default_layer_state)) {
+                    case _COLEMAK:
+                        rgblight_set_hsv_and_mode(HSV_MAGENTA, mode);
+                        break;
+                    case _DVORAK:
+                        rgblight_set_hsv_and_mode(HSV_SPRINGGREEN, mode);
+                        break;
+                    default:
+                        rgblight_set_hsv_and_mode(HSV_CYAN, mode);
+                        break;
+                }
+                break;
+            }
+        }
+    }
+#endif  // RGBLIGHT_ENABLE
+
+    return state;
+}
+
+#ifdef RGB_MATRIX_ENABLE
+#    include "lib/lib8tion/lib8tion.h"
+extern led_config_t g_led_config;
+
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type) {
+    HSV hsv = {hue, sat, val};
+    if (hsv.v > rgb_matrix_config.hsv.v) {
+        hsv.v = rgb_matrix_config.hsv.v;
+    }
+
+    switch (mode) {
+        case 1:  // breathing
+        {
+            uint16_t time = scale16by8(g_rgb_counters.tick, speed / 8);
+            hsv.v         = scale8(abs8(sin8(time) - 128) * 2, hsv.v);
+            RGB rgb       = hsv_to_rgb(hsv);
+            for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+                if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+                    rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+                }
+            }
+            break;
+        }
+        default:  // Solid Color
+        {
+            RGB rgb = hsv_to_rgb(hsv);
+            for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+                if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+                    rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+                }
+            }
+            break;
+        }
+    }
+}
+#endif

users/curry/rgb_stuff.h

@@ -0,0 +1,32 @@
+#pragma once
+#include "quantum.h"
+#ifdef RGB_MATRIX_ENABLE
+#    include "rgb_matrix.h"
+#endif
+
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_TWINKLE)
+typedef struct {
+    bool     enabled;
+    uint8_t  hue;
+    uint16_t timer;
+    uint8_t  life;
+} rgblight_fadeout;
+#endif
+
+bool          process_record_user_rgb(uint16_t keycode, keyrecord_t *record);
+void          keyboard_post_init_rgb(void);
+void          matrix_scan_rgb(void);
+layer_state_t layer_state_set_rgb(layer_state_t state);
+layer_state_t default_layer_state_set_rgb(layer_state_t state);
+
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_TWINKLE)
+void scan_rgblight_fadeout(void);
+#endif
+#if defined(RGBLIGHT_ENABLE)
+void rgblight_sethsv_default_helper(uint8_t index);
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type);
+#endif

users/curry/rgblight_breathe_table.h

@@ -0,0 +1,118 @@
+#ifndef RGBLIGHT_EFFECT_BREATHE_TABLE
+#define RGBLIGHT_EFFECT_BREATHE_TABLE
+
+// clang-format off
+const uint8_t rgblight_effect_breathe_table[] PROGMEM = {
+/* #define RGBLIGHT_EFFECT_BREATHE_CENTER   0.00 */
+/* #define RGBLIGHT_EFFECT_BREATHE_MAX      255 */
+
+ #if RGBLIGHT_BREATHE_TABLE_SIZE == 256
+  0x44,  0x45,  0x47,  0x48,  0x4a,  0x4b,  0x4c,  0x4e,
+  0x4f,  0x51,  0x52,  0x54,  0x55,  0x57,  0x58,  0x5a,
+  0x5c,  0x5d,  0x5f,  0x60,  0x62,  0x64,  0x65,  0x67,
+  0x69,  0x6a,  0x6c,  0x6e,  0x70,  0x72,  0x73,  0x75,
+  0x77,  0x79,  0x7b,  0x7c,  0x7e,  0x80,  0x82,  0x84,
+  0x86,  0x88,  0x8a,  0x8b,  0x8d,  0x8f,  0x91,  0x93,
+  0x95,  0x97,  0x99,  0x9b,  0x9d,  0x9f,  0xa1,  0xa3,
+  0xa5,  0xa7,  0xa9,  0xaa,  0xac,  0xae,  0xb0,  0xb2,
+  0xb4,  0xb6,  0xb8,  0xba,  0xbc,  0xbe,  0xbf,  0xc1,
+  0xc3,  0xc5,  0xc7,  0xc9,  0xca,  0xcc,  0xce,  0xd0,
+  0xd1,  0xd3,  0xd5,  0xd6,  0xd8,  0xda,  0xdb,  0xdd,
+  0xde,  0xe0,  0xe1,  0xe3,  0xe4,  0xe5,  0xe7,  0xe8,
+  0xe9,  0xeb,  0xec,  0xed,  0xee,  0xef,  0xf0,  0xf1,
+  0xf2,  0xf3,  0xf4,  0xf5,  0xf6,  0xf7,  0xf8,  0xf8,
+  0xf9,  0xfa,  0xfa,  0xfb,  0xfc,  0xfc,  0xfc,  0xfd,
+  0xfd,  0xfe,  0xfe,  0xfe,  0xfe,  0xfe,  0xfe,  0xfe,
+  0xfe,  0xfe,  0xfe,  0xfe,  0xfe,  0xfe,  0xfe,  0xfd,
+  0xfd,  0xfc,  0xfc,  0xfc,  0xfb,  0xfa,  0xfa,  0xf9,
+  0xf8,  0xf8,  0xf7,  0xf6,  0xf5,  0xf4,  0xf3,  0xf2,
+  0xf1,  0xf0,  0xef,  0xee,  0xed,  0xec,  0xeb,  0xe9,
+  0xe8,  0xe7,  0xe5,  0xe4,  0xe3,  0xe1,  0xe0,  0xde,
+  0xdd,  0xdb,  0xda,  0xd8,  0xd6,  0xd5,  0xd3,  0xd1,
+  0xd0,  0xce,  0xcc,  0xca,  0xc9,  0xc7,  0xc5,  0xc3,
+  0xc1,  0xbf,  0xbe,  0xbc,  0xba,  0xb8,  0xb6,  0xb4,
+  0xb2,  0xb0,  0xae,  0xac,  0xaa,  0xa9,  0xa7,  0xa5,
+  0xa3,  0xa1,  0x9f,  0x9d,  0x9b,  0x99,  0x97,  0x95,
+  0x93,  0x91,  0x8f,  0x8d,  0x8b,  0x8a,  0x88,  0x86,
+  0x84,  0x82,  0x80,  0x7e,  0x7c,  0x7b,  0x79,  0x77,
+  0x75,  0x73,  0x72,  0x70,  0x6e,  0x6c,  0x6a,  0x69,
+  0x67,  0x65,  0x64,  0x62,  0x60,  0x5f,  0x5d,  0x5c,
+  0x5a,  0x58,  0x57,  0x55,  0x54,  0x52,  0x51,  0x4f,
+  0x4e,  0x4c,  0x4b,  0x4a,  0x48,  0x47,  0x45,  0x44
+ #endif /* 256 bytes table */
+
+ #if RGBLIGHT_BREATHE_TABLE_SIZE == 128
+  0x44,  0x47,  0x4a,  0x4c,
+  0x4f,  0x52,  0x55,  0x58,
+  0x5c,  0x5f,  0x62,  0x65,
+  0x69,  0x6c,  0x70,  0x73,
+  0x77,  0x7b,  0x7e,  0x82,
+  0x86,  0x8a,  0x8d,  0x91,
+  0x95,  0x99,  0x9d,  0xa1,
+  0xa5,  0xa9,  0xac,  0xb0,
+  0xb4,  0xb8,  0xbc,  0xbf,
+  0xc3,  0xc7,  0xca,  0xce,
+  0xd1,  0xd5,  0xd8,  0xdb,
+  0xde,  0xe1,  0xe4,  0xe7,
+  0xe9,  0xec,  0xee,  0xf0,
+  0xf2,  0xf4,  0xf6,  0xf8,
+  0xf9,  0xfa,  0xfc,  0xfc,
+  0xfd,  0xfe,  0xfe,  0xfe,
+  0xfe,  0xfe,  0xfe,  0xfe,
+  0xfd,  0xfc,  0xfb,  0xfa,
+  0xf8,  0xf7,  0xf5,  0xf3,
+  0xf1,  0xef,  0xed,  0xeb,
+  0xe8,  0xe5,  0xe3,  0xe0,
+  0xdd,  0xda,  0xd6,  0xd3,
+  0xd0,  0xcc,  0xc9,  0xc5,
+  0xc1,  0xbe,  0xba,  0xb6,
+  0xb2,  0xae,  0xaa,  0xa7,
+  0xa3,  0x9f,  0x9b,  0x97,
+  0x93,  0x8f,  0x8b,  0x88,
+  0x84,  0x80,  0x7c,  0x79,
+  0x75,  0x72,  0x6e,  0x6a,
+  0x67,  0x64,  0x60,  0x5d,
+  0x5a,  0x57,  0x54,  0x51,
+  0x4e,  0x4b,  0x48,  0x45
+ #endif /* 128 bytes table */
+
+ #if RGBLIGHT_BREATHE_TABLE_SIZE == 64
+  0x44,  0x4a,
+  0x4f,  0x55,
+  0x5c,  0x62,
+  0x69,  0x70,
+  0x77,  0x7e,
+  0x86,  0x8d,
+  0x95,  0x9d,
+  0xa5,  0xac,
+  0xb4,  0xbc,
+  0xc3,  0xca,
+  0xd1,  0xd8,
+  0xde,  0xe4,
+  0xe9,  0xee,
+  0xf2,  0xf6,
+  0xf9,  0xfc,
+  0xfd,  0xfe,
+  0xfe,  0xfe,
+  0xfd,  0xfb,
+  0xf8,  0xf5,
+  0xf1,  0xed,
+  0xe8,  0xe3,
+  0xdd,  0xd6,
+  0xd0,  0xc9,
+  0xc1,  0xba,
+  0xb2,  0xaa,
+  0xa3,  0x9b,
+  0x93,  0x8b,
+  0x84,  0x7c,
+  0x75,  0x6e,
+  0x67,  0x60,
+  0x5a,  0x54,
+  0x4e,  0x48
+ #endif /* 64 bytes table */
+};
+// clang-format on
+
+static const int table_scale = 256 / sizeof(rgblight_effect_breathe_table);
+
+#endif /* RGBLIGHT_EFFECT_BREATHE_TABLE */

users/curry/rules.mk

@@ -0,0 +1,61 @@
+SRC += curry.c \
+       process_records.c
+
+LTO_ENABLE            = yes
+SPACE_CADET_ENABLE    = no
+
+ifneq ($(strip $(NO_SECRETS)), yes)
+    ifneq ("$(wildcard $(USER_PATH)/secrets.c)","")
+        SRC += secrets.c
+    endif
+    ifeq ($(strip $(NO_SECRETS)), lite)
+        OPT_DEFS += -DNO_SECRETS
+    endif
+endif
+
+ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
+    SRC += tap_dances.c
+endif
+
+ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
+    SRC += oled.c
+endif
+
+ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
+    SRC += rgb_stuff.c
+    ifeq ($(strip $(INDICATOR_LIGHTS)), yes)
+        OPT_DEFS += -DINDICATOR_LIGHTS
+    endif
+    ifeq ($(strip $(RGBLIGHT_TWINKLE)), yes)
+        OPT_DEFS += -DRGBLIGHT_TWINKLE
+    endif
+    ifeq ($(strip $(RGBLIGHT_NOEEPROM)), yes)
+        OPT_DEFS += -DRGBLIGHT_NOEEPROM
+    endif
+    ifeq ($(strip $(RGBLIGHT_STARTUP_ANIMATION)), yes)
+        OPT_DEFS += -DRGBLIGHT_STARTUP_ANIMATION
+    endif
+endif
+
+RGB_MATRIX_ENABLE ?= no
+ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
+    SRC += rgb_stuff.c
+endif
+
+
+ifdef CONSOLE_ENABLE
+    ifeq ($(strip $(KEYLOGGER_ENABLE)), yes)
+        OPT_DEFS += -DKEYLOGGER_ENABLE
+    endif
+endif
+
+ifeq ($(strip $(MAKE_BOOTLOADER)), yes)
+    OPT_DEFS += -DMAKE_BOOTLOADER
+endif
+
+# At least until build.mk or the like drops, this is here to prevent
+# VUSB boards from enabling NKRO, as they do not support it. Ideally
+# this should be handled per keyboard, but until that happens ...
+ifeq ($(strip $(PROTOCOL)), VUSB)
+    NKRO_ENABLE       = no
+endif

users/curry/tap_dances.c

@@ -0,0 +1,3 @@
+#include "curry.h"
+
+qk_tap_dance_action_t tap_dance_actions[] = {};

users/curry/tap_dances.h

@@ -0,0 +1,3 @@
+#pragma once
+#include "curry.h"
+

users/curry/wrappers.h

@@ -0,0 +1,92 @@
+#pragma once
+#include "curry.h"
+/*
+Since our quirky block definitions are basically a list of comma separated
+arguments, we need a wrapper in order for these definitions to be
+expanded before being used as arguments to the LAYOUT_xxx macro.
+*/
+#if (!defined(LAYOUT) && defined(KEYMAP))
+#    define LAYOUT KEYMAP
+#endif
+
+// clang-format off
+#define KEYMAP_wrapper(...)                  LAYOUT(__VA_ARGS__)
+#define LAYOUT_wrapper(...)                  LAYOUT(__VA_ARGS__)
+#define LAYOUT_ortho_4x12_wrapper(...)       LAYOUT_ortho_4x12(__VA_ARGS__)
+#define LAYOUT_ortho_5x12_wrapper(...)       LAYOUT_ortho_5x12(__VA_ARGS__)
+
+/*
+Blocks for each of the four major keyboard layouts
+Organized so we can quickly adapt and modify all of them
+at once, rather than for each keyboard, one at a time.
+And this allows for much cleaner blocks in the keymaps.
+For instance Tap/Hold for Control on all of the layouts
+
+NOTE: These are all the same length.  If you do a search/replace
+  then you need to add/remove underscores to keep the
+  lengths consistent.
+*/
+
+#define _________________QWERTY_L1_________________         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T
+#define _________________QWERTY_L2_________________         KC_A,    KC_S,    KC_D,    KC_F,    KC_G
+#define _________________QWERTY_L3_________________         KC_Z,    KC_X,    KC_C,    KC_V,    KC_B
+
+#define _________________QWERTY_R1_________________         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P
+#define _________________QWERTY_R2_________________         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN
+#define _________________QWERTY_R3_________________         KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLASH
+
+#define _________________COLEMAK_L1________________         KC_Q,    KC_W,    KC_F,    KC_P,    KC_B
+#define _________________COLEMAK_L2________________         KC_A,    KC_R,    KC_S,    KC_T,    KC_G
+#define _________________COLEMAK_L3________________         KC_Z,    KC_X,    KC_C,    KC_D,    KC_V
+
+#define _________________COLEMAK_R1________________         KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN
+#define _________________COLEMAK_R2________________         KC_M,    KC_N,    KC_E,    KC_I,    KC_O
+#define _________________COLEMAK_R3________________         KC_K,    KC_H,    KC_COMM, KC_DOT,  KC_SLASH
+
+#define _________________DVORAK_L1_________________         KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y
+#define _________________DVORAK_L2_________________         KC_A,    KC_O,    KC_E,   KC_U,     KC_I
+#define _________________DVORAK_L3_________________         KC_SCLN, KC_Q,    KC_J,   KC_K,     KC_X
+
+#define _________________DVORAK_R1_________________         KC_F,    KC_G,    KC_C,    KC_R,    KC_L
+#define _________________DVORAK_R2_________________         KC_D,    KC_H,    KC_T,    KC_N,    KC_S
+#define _________________DVORAK_R3_________________         KC_B,    KC_M,    KC_W,    KC_V,    KC_Z
+
+
+#define ________________NUMBER_LEFT________________         KC_1,    KC_2,    KC_3,    KC_4,    KC_5
+#define ________________NUMBER_RIGHT_______________         KC_6,    KC_7,    KC_8,    KC_9,    KC_0
+
+#define _________________FUNC_LEFT_________________         KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5
+#define _________________FUNC_RIGHT________________         KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10
+
+#define _________________SYM_LEFT__________________         KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC
+#define _________________SYM_RIGHT_________________         KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN
+
+
+#define ___________________BLANK___________________         _______, _______, _______, _______, _______
+
+
+#define _________________LOWER_L1__________________         _________________FUNC_LEFT_________________
+#define _________________LOWER_L2__________________         _________________SYM_LEFT__________________
+#define _________________LOWER_L3__________________         KC_DT1,  KC_DT2,  KC_DT3,  KC_DT4,  _______
+
+#define _________________LOWER_R1__________________         _________________FUNC_RIGHT________________
+#define _________________LOWER_R2__________________         _________________SYM_RIGHT_________________
+#define _________________LOWER_R3__________________         _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR
+
+#define _________________RAISE_L1__________________         ________________NUMBER_LEFT________________
+#define _________________RAISE_L2__________________         KC_PGUP, KC_PGDN, KC_HOME, KC_END,  _______
+#define _________________RAISE_L3__________________         _______, _______, _______, _______, _______
+
+#define _________________RAISE_R1__________________         ________________NUMBER_RIGHT_______________
+#define _________________RAISE_R2__________________         KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______
+#define _________________RAISE_R3__________________         _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC
+
+#define _________________ADJUST_L1_________________         RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG
+#define _________________ADJUST_L2_________________         MU_TOG , CK_TOGG, AU_ON,   AU_OFF,  CG_NORM
+#define _________________ADJUST_L3_________________         RGB_RMOD,RGB_HUD,RGB_SAD, RGB_VAD, KC_RGB_T
+
+#define _________________ADJUST_R1_________________         KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5
+#define _________________ADJUST_R2_________________         CG_SWAP, QWERTY,  COLEMAK, DVORAK,  XXXXXXX
+#define _________________ADJUST_R3_________________         MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT
+
+// clang-format on